Menu
Ohm's law is a fundamental equation that shows how voltage, electrical current and electrical resistance are related in simple conductors such as resistors. This experiments allows you to explore Ohm's law and how the coloured bands on resistors codes their resistance. In doing this you will also learn how to use a power supply and 'digital multimeters'.
Press GO to launch the experiment!
Ohm’s law
Voltage, current and resistance are the most fundamental quantities for describing the flow of electricity. Ohm’s law shows how these three quantities are related and so is a powerful way of understanding the basic nature of electricity.
This is relevant to vast areas of technology today, including national electricity grids, power generation, design of all electronic devices and all electronic circuits, heating, electrical safety and understanding of natural phenomena such as lightning. This experiment will allow you to explore Ohm’s law by making measurements of voltage, current and resistance.
Resistors
Resistors are the simplest and most commonly used electronic component and almost all electronic circuits contain them. They can be used to change the properties of any circuit they are part of, such as current flow, how voltage is distributed across components, the speed of a circuit, the amount of amplification from a circuit, the response of a sensor or the amount of electrical heating from a circuit.
The simplest resistors are made of a thin film or wound wire of carbon or metal. They usually have a series of coloured bands that represents both their target resistance value and how much the actual value might vary from this (the ‘tolerance’). This experiment lets you practise selecting the appropriate colour bands on a resistor to achieve a certain resistance value.
Digital Multimeters
Digital multimeters (DMMs) are versatile pieces of equipment commonly found in electronics, physics and engineering labs. In this experiment you’ll learn how to use a DMM to measure voltage, current and resistance. You’ll see this piece of equipment in many other FlashyScience experiments!
Use this experiment to find out more!
Download the file below for the quick guide for the Ohm's Law experiment (requires login) or follow these brief instructions:
To measure resistance:
To change the resistor:
To use voltage and current:
Download the file below for full instructions for the Ohm's Law experiment (requires log in).
Download the files below for activities for the Ohm's Law experiment (requires login).
(Available as separate downloads or all activities)
*NEW* Now also available in editable Microsoft Word format
Download the file below for the background science behind the Ohm's Law experiment (requires log in).
A potential divider is a simple circuit that uses resistors to supply a variable 'potential difference' (i.e. voltage).This can be used for many applications, including control of temperature in a fridge or as audio volume controls. Understanding how the resistors in the circuit allow this is important for designing many electronic circuits. Here you can investigate how changes in the two resistors can lead to different voltages across them.
Press GO to launch the experiment!
Most electrical or electronic circuits use the voltage across the circuit components to perform some task. This includes motors, sensors, speakers, computer chips, LEDs and diode lasers, communications antennas (e.g. in mobile phones), heaters, turbines, and mains electricity delivery to houses and industry.
It is important to know how to control the voltages in these circuits to make the applications work! The simplest circuit to start to understand this is the potential divider, which is made up of two resistors in series. Other circuits may be made of more advanced components but often use the same principles of voltage (i.e. ‘potential’) division. For example: two transistors in opposite high or low resistance states and connected in series are used to define whether a ‘logic gate’ is set to a digital (Boolean) value of 1 or 0, and are a fundamental building block of how a digital computer processor works.
Sensors can be made from a fixed resistor and a component that has a resistance that depends on whatever is being sensed connected, e.g. a thermistor for sensing heat or a light-dependent resistor for sensing light. A voltage applied to the two components in series allows the voltage across the fixed resistor to be a measure of the resistance of the sensing element’s resistance. This approach can avoid some difficulties of just using the single element, such as high power consumption.
Electrical heaters (including room heaters, cookers and hair dryers) use a fixed resistance heating element (e.g. a coil of wire) and a variable resistance transistor in series. The resistance of the transistor then controls how much voltage is across the heating element and, therefore, how much electrical heating is produced!
This experiment allows you to gain a good understanding of the potential divider. It also allows you to reinforce your understanding of Ohm’s law, how resistor coloured bands code for resistance, and how to use digital multimeters (DMMs), which you may have already met in the FlashyScience Ohm’s Law experiment.
Use this experiment to find out more!
Download the file below for the quick guide for the Potential Divider experiment (requires login) or follow these brief instructions:
To measure resistance:
To change a resistor:
To measure voltage and current:
Download the file below for full instructions for the Potential Divider experiment (requires log in).
Download the file below for activities for the Potential Divider experiment (requires login).
(Available as separate downloads or all activities)
*NEW* Now also available in editable Microsoft Word format
Download the file below for the background science behind the Potential Divider experiment (requires log in).
The electrical resistivity of a wire tells us how well the wire material conducts electricity. This is crucial information for any application that involves conducting electricity, including wind turbines, electric vehicles, household electrical goods and computers. Here you can measure the resistivity of wires of different materials and widths, and consider which would be best suited for conducting electricity.
Press GO to launch the experiment!
Electronic materials are crucial to our life today, and electrical ‘resistivity’ tells us how good or poor a material is at conducting electricity.
We use materials with low electrical resistivity to transmit electrical power from generators, across grid distribution networks, and to homes and workplaces for use. Designers of electrical devices rely on knowing the resistivity of wire used in order to calculate the resistance of components.
These devices range in size from enormous machines such as wind turbines or industrial lifting equipment; motors or engines in electric vehicles and all-new electric aircraft; consumer products such as washing machines, hair dryers and ovens; and the nanoscale components within the computer chips found in smart devices, laptops, and mobile phones.
In fact, modern computing is based on controlling the resistivity of semiconductor materials in a type of transistor (known as ‘field effect transistors’ using ‘CMOS’ technology).
Measuring electrical resistivity helps us to understand the properties of materials, to monitor manufacturing processes, and to select the best material for an application.
Use this experiment to find out more!
Download the file below for the quick guide for the Resistivity of a Wire experiment (requires login) or follow these brief instructions:
Download the file below for full instructions for the Resistivity of a Wire experiment (requires log in).
Download the file below for activities for the Resitivity of a Wire experiment (requires login).
(Available as separate downloads or all activities)
*NEW* Now also available in editable Microsoft Word format
Download the file below for the background science behind the Resitivity of a Wire experiment (requires log in).
An 'IV characteristic' of a device shows how the electrical current in the device changes with applied potential difference. The IV characteristic is linear for some devices and nonlinear for others. This experiment allows you to explore the IV characteristics of resistors, a filament lamp and diodes by changing and measuring potential difference and current.
Press GO to launch the experiment!
Electricity powers the modern world. It is essential for electronic devices, home appliances, travel and school, work and leisure.
The widespread use of electricity is because we can make so many components that have different electrical behaviours, and then combine them to make all sorts of devices and machines. These behaviours can be seen most easily by creating a graph of the electrical current (I) through a component against the potential difference (V) placed across it. This graph is known as a component’s IV characteristic.
The simplest component is the electrical resistor. These have fixed electrical resistance, which means the electrical current is proportional to the potential difference and the IV characteristic is linear. Resistors are vital to almost all electrical devices, from a mobile phone to the world’s most powerful supercomputer, a flashlight to electric vehicles, an electric toothbrush to a medical scanner, your internet router to a communications satellite, or a vacuum cleaner to air-conditioning.
Diodes are made of two different semiconductor materials joined together and only allow electricity to flow in one direcion through them. They are hugely important in electronics and electrical engineering. They are most often used to convert alternating current (AC) electricity to direct current (DC), for example to convert mains electricity into 12 V DC used for charging mobile devices. They are also widely used to protect electronic circuits by preventing unwanted currents.
Filament lamps might not be used for lighting as much as they once were but they show interesting electrical effects. They contain a long, thin metal 'filament' that heats up when high electrical current is flowing, which results in it starting to glow and give off light. The heating also changes the filament's electrical resistance, which results in a non-linear IV characteristic.
This virtual experiment will allow you to explore the electrical behaviour of resistors, diodes and filament lamps. You can take measurements of current and potential difference, plot a graph of their IV characteristics, and find their resistance values.
Use this experiment to find out more!
Download the file below for the quick guide for the IV Characteristics of Devices experiment (requires login).
Download the file below for full instructions for the IV Characteristics of Devices experiment (requires log in).
Download the files below for activities for the IV Characteristics of Devices experiment (requires login).
(Available as separate downloads or all activities)
*NEW* Now also available in editable Microsoft Word format
Download the file below for the background science behind the IV Characteristics of Devices experiment (requires log in).
Understanding the electric resistance of metal wires is fundamental to being able to design electrical machines and electronic devices. In this experiment, you can vary the effective length of a wire by moving an electrical contact and then go on to measure the wire's electric resistance by measuring potential difference and electric current on analogue dials.
Press GO to launch the experiment!
Electricity powers so much of our life today. We use metal wires to transmit electrical power from power generators, such as power stations, ‘PV’ (photovoltaic) devices and wind turbines, to our homes and workplaces.
We use ‘resistance’ to measure how easily materials allow electrical current to flow. It is vital to the design of power distribution networks over long distances to understand how the length of a metal wire affects its resistance.
On smaller scales, it is important to know how the length of a conducting wire changes its resistance for applications that use motors, from washing machines through to electric cars and industrial machines. Electricity is also used in heaters, from industrial furnaces for large-scale materials processing through to ovens, underfloor heating and kettles, and in all sorts of electronic devices, such as computers, screens and sensors.
Designing any of these applications to be efficient and effective requires understanding how electricity flows through the materials in the various devices.
Use this experiment to find out more!
Download the file below for the quick guide for the Resistance (of a wire) experiment (requires login).
Download the file below for full instructions for the Resistance (of a wire) experiment (requires log in).
Download the files below for activities and associated worksheets for the Resistance (of a wire) experiment (requires login).
(Available as separate downloads or all activities/all worksheets)
*NEW* Now also available in editable Microsoft Word format
Download the file below for the background science behind the Resitance (of a wire) experiment (requires log in).
